 |
 |
 |
 |
 |
 |
|||
|
|
|
|
|
|
|||
Tiled Res. Roofs Metal Res. Roofs Metal Comm/Whse. Roofs Metal Comm/Whse. Retrofit Brick Veneer Walls Dble Brick Walls Framed Walls Concrete Panel Walls Floors Ceilings Concrete Roofs Joining Methods 
PRODUCT |
Application |
Wire Safety Mesh Specified |
Lap / Butt Join |
Tape |
Remarks |
|
Glareshield® Retroshield ® Insulbreak ® Permishield ® |
Commercial - Flat Roof | No | Lapped 50mm | Min. 72mm wide foil tape on top | Preferred Method |
| Yes | Lapped 50mm | No Tape Required | |||
| Commercial - Pitched Roof | No | Lapped 50mm | No Tape Required | Provided no gaps or opening in join - use 72mm tape if required. | |
| Residential - Pitched Roof | No | Lapped 150mm | No Tape Required | Provided no gaps or opening in join - use 48mm tape if required | |
| Sheds | No | Butt Joined | Min. 72mm wide foil tape | ||
| Framed Walls | N/A | Butt Joined | 48mm foil tape | ||
| Cavity Walls | N/A | Lapped 150mm | 48mm tape | ||
| Timber Floors | No | Lapped 150mm | No tape | AIR-CELL® under joist-Enclosed sub-floor | |
| No | Lapped 50mm | 48mm tape | AIR-CELL® under joist-Preferred Method | ||
| No | Butt Joined | 48mm tape | AIR-CELL® over joist | ||
| Insulaire® | Commercial - Flat Roof | No | Butt Joined | Min. 72mm wide foil tape on top | Preferred Method |
| No | Min. 72mm wide foil tape on bottom | ||||
| No | Lapped 50mm | Min. 72 wide foil tape on top | |||
| Yes | Lapped 150mm | No tape required | |||
| Warehouse Wall | N/A | Lapped 50mm | Min. 72mm wide white tap on face | ||
| N/A | Lapped 50mm | Min. 72mm wide white tap on face |
When taping AIR-CELL®, a plastic squeegee or blade must be used to apply appropriate pressure to the tape. Apply pressure as the tape is being rolled out, rahter than after application, to achieve maximum adhesion. Surfaces must be free from dust, oil or grease prior to taping.